What is ThermaSkirt-e? 

ThermaSkirt-e in a Nutshell:

ThermaSkirt-e is a revolutionary new form of direct electric heating, designed to replace electric storage heaters and panel radiators, as well as provide a more practical, controllable & reliable alternative to electric under floor heating.

  • Combines your skirting boards and heating system into one simple, cost-effective package
  • Creates a more spacious environment by eliminating radiators from walls
  • Made from an aluminium alloy that is 5 times better at emitting heat than steel
  • Heats up fast like a radiator but has the comforting feel of underfloor heating when in operation
  • Can work with any floor construction or finish ‐ (timber, concrete, wood, carpet, etc.)
  • Connected to a standard 220/240V switched fused supply via a programmable thermostat
  • Specially developed controls learn the heating characteristics of a room to maximise efficiency
  • Provides clean, hygienic heat with no grilles, slots or fins to attract and trap dust and bacteria
  • No trip or fall hazards usually associated with bulky radiators
ThermaSkirt-e Profile

How does it work?

Working in conjunction with one of Europe’s most experienced and reputable manufacturers of heating technology, we have developed a unique thin film heating element that is bonded to the rear of a radiant panel which has been specifically designed to look like a typical skirting board profile.

These panels are simply cut to size and installed using an insulating rear-mount fixing all around the room – just like a skirting board.

ThermaSkirt-e skirting is then connected to a standard 220/240V switched fused supply which can simply be turned on and off when required - allowing you to reduce your energy consumption and keep costs to a minimum.

Once the ThermaSkirt is switched on the face of the panel heats up and radiates heat into the room in the same way that underfloor heating does but as it’s all above ground response times are much quicker and the room heats up in minutes rather than hours.

Radiant heat produced from low level is more efficient than using convectors like Radiators Radiant heat produced from low level is more efficient than using convectors like Radiators

How is it controlled?

ThermaSkirt-e is controlled by a specially developed electronic thermostat that ‘learns’ the heating characteristics and warm up times of the room to maximise efficiency.

The time and temperature settings can be individually configured in a matter of minutes to provide a tailor-made solution to your heating needs.

Built into the TherMiser 3E control is an air sensor which turns the heating on once the temperature of the air drops below the pre-set temperature (and switches off again once that temperature has been reached).

A probe capable of limiting the temperature is also supplied with the thermostat for applications where low surface temperature heating is required (such as in schools, care homes and hospitals). This will allow you to set the maximum surface temperature of the skirting and when it reaches that temperature the heating turns off.

You can find more details relating to the TherMiser 3E thermostat here...

TherMiser 3E control


Interested in getting ThermaSkirt-e in your home? Contact us now


Recent Installations

  Mr & Mrs Delarge, Brittany, France (Failed electric UFH replacement)

Image1
Image2

     Morgan Stanley Bank, Canary Wharf, London. (Office & Meeting Room heating)

Image1
Image2

     BME 2 with optional Torus Top Capping

Image1 Before
Image2 After (BME 2 with optional Torus Top Capping)

     Mr & Mrs Schachler, Manchester (Electric Panel Heater replacement)

Image1
Image2

Company

Showroom:
DiscreteHeat Company Limited
1 Victoria Works Industrial Estate
Coal Pit Lane, Atherton
Manchester, M46 0FY

01942 88 00 60
01942 66 51 04
info@discreteheat.co.uk

VAT# 884427392
Company Reg# 5594330