Technical Data & Instructions

Here you will find all the information you should need to learn about ThermaSkirt & its installation. If you have a special application or question, please contact us using the contact form on the left.

Download ThermaSkirt Design Software to enable you to get a design of your room complete with all the components, correct cut length sizes, the estimated heat requirements and the ThermaSkirt output at any flow temperature.

General Requirements

  • You need to have Adobe Acrobat Reader, Microsoft Office Word & Latest Flash player on your system to fully utilise our templates, instructions & technical presentations
  • Without Adobe Acrobat Reader, you will be unable to view helping Technical documents
  • Without Flash Player, you will be unable to view our flash presentations


Technical Data & Specification

Results from BSRIA Test Data to BSEN 442-1

@ Flow rate: 56g/sec

All test data based on powder coated white finish RAL 9010 to BS-EN 12206-1


ThermaSkirt Urban LT Profile (150mm/6" x 20mm)
Weight: 1.35kg/m
Boiler TempWatts/m BTU/mBTU/ft
dt50
(72°C flow)
148.50 506153
40°C46 15745
45°C59 20160
50°C73 24975
55°C88 30091
60°C104 355106
70°C142 484139
75°C159 542164
ThermaSkirt Classic Torus TS Profile (150mm/6" x 20mm)
Weight: 1.35kg/m
Boiler TempWatts/m BTU/mBTU/ft
dt50
(72°C flow)
150 512155
40°C47 16048
45°C60 20562
50°C74 25276
55°C89 30492
60°C105 358108
70°C144 491149
75°C160 546165


ThermaSkirt Regency OG Profile (200mm/8" x 20mm)
Weight: 1.65kg/m
Boiler TempWatts/m BTU/mBTU/ft
dt50
(72°C flow)
170.80 583177
40°C52.90 18055
45°C67.90 23170
50°C84.00 28787
55°C101.20 345105
60°C119.60 408124
70°C163.30 557169
75°C182.90 624189
ThermaSkirt Deco Profile (115mm/4.5" x 20mm)
Weight: 1.1kg/m (Estimated subject to BSRIA test)
Boiler TempWatts/m BTU/mBTU/ft
dt50
(72°C flow)
131.20 448136
40°C41.40 14143
45°C53.10 18155
50°C65.70 22468
55°C79.20 27082
60°C93.60 31997
70°C127.80 436132
75°C143.10 488148


“DiscreteHeat recommends an allowance of up to 3% to these outputs on exterior walls to allow for back losses. Further precautions may be required depending on the age and/or nature of the construction of the building – please contact DiscreteHeat for advice.”


ThermaSkirt
Material: Aluminium & Polymer Alloy
Thermal Conductivity: 236w/m2/K
Water Content 0.49l per m
Paint Finish: to BS EN 12206-1
Foil Finish (where applied) Renolit MBAS 0.15mm

Corrosion Resistance: Excellent
Oxygen Permeability: 0 (Negligible)

Valves & Return Manifold
Material: Non Hygroscopic Engineering grade polypropylene / Nylon mix
Oxygen Permeability: 0 (Negligible)
O Ring: Balanced Twin Shore Viton & Silicon Mix

Maximum Operating Pressure: 10bar (150psi)
Maximum Op. Temperature: (Greater than or Equal to) 130°C
Connectors
Material: Non Hygroscopic Engineering grade polypropylene / Nylon mix
Oxygen Permeability: 0 (Negligible)
O Ring: Balanced Twin Shore Viton & Silicon Mix

Maximum Operating Pressure: 10bar (150psi)
Maximum Op. Temperature: (Greater than or Equal to) 130°C

Connector Clips, Brackets & Fixtures
Punch pressed 306 Stainless Steel

Mounting Brackets (LT, TS & OG)
High Temperature Resistant Graphite Nylon

Covers & Corners
Ultra-stable temperature resistant ABS & UPVC
Foil Finish (where applied) Renolit MBAS 0.15mm


Have a question or need a custom quote?

Contact us now on 01942 88 00 66

Let us help you improve the aesthetics, space and energy performance of your home by fitting "ThermaSkirt – The Worlds Smartest Heating System"


  
    
  
  

 
  

Company

Showroom:
DiscreteHeat Company Limited
1 Victoria Works Industrial Estate
Coal Pit Lane, Atherton
Manchester, M46 0FY

01942 88 00 60
01942 66 51 04
info@discreteheat.co.uk

VAT# 884427392
Company Reg# 5594330