Performance & Technical Information

Results from BSRIA Test Data to BSEN 442-1

@ Flow rate: 56g/sec

All test data based on powder coated white finish RAL 9010 to BS-EN 12206-1


ThermaSkirt Urban LT Profile (150mm/6" x 20mm)
Weight: 1.35kg/m
Boiler TempWatts/m BTU/mBTU/ft
dt50
(72°C flow)
148.50 506153
40°C46 15745
45°C59 20160
50°C73 24975
55°C88 30091
60°C104 355106
70°C142 484139
75°C159 542164
ThermaSkirt Classic Torus TS Profile (150mm/6" x 20mm)
Weight: 1.35kg/m
Boiler TempWatts/m BTU/mBTU/ft
dt50
(72°C flow)
150 512155
40°C47 16048
45°C60 20562
50°C74 25276
55°C89 30492
60°C105 358108
70°C144 491149
75°C160 546165


ThermaSkirt Regency OG Profile (200mm/8" x 20mm)
Weight: 1.65kg/m
Boiler TempWatts/m BTU/mBTU/ft
dt50
(72°C flow)
170.80 583177
40°C52.90 18055
45°C67.90 23170
50°C84.00 28787
55°C101.20 345105
60°C119.60 408124
70°C163.30 557169
75°C182.90 624189
ThermaSkirt Deco Profile (115mm/4.5" x 20mm)
Weight: 1.1kg/m (Estimated subject to BSRIA test)
Boiler TempWatts/m BTU/mBTU/ft
dt50
(72°C flow)
131.20 448136
40°C41.40 14143
45°C53.10 18155
50°C65.70 22468
55°C79.20 27082
60°C93.60 31997
70°C127.80 436132
75°C143.10 488148


“DiscreteHeat recommends an allowance of up to 3% to these outputs on exterior walls to allow for back losses. Further precautions may be required depending on the age and/or nature of the construction of the building – please contact DiscreteHeat for advice.”


ThermaSkirt
Material: Aluminium & Polymer Alloy
Thermal Conductivity: 236w/m2/K
Water Content 0.49l per m
Paint Finish: to BS EN 12206-1
Foil Finish (where applied) Renolit MBAS 0.15mm

Corrosion Resistance: Excellent
Oxygen Permeability: 0 (Negligible)

Valves & Return Manifold
Material: Non Hygroscopic Engineering grade polypropylene / Nylon mix
Oxygen Permeability: 0 (Negligible)
O Ring: Balanced Twin Shore Viton & Silicon Mix

Maximum Operating Pressure: 10bar (150psi)
Maximum Op. Temperature: (Greater than or Equal to) 130°C
Connectors
Material: Non Hygroscopic Engineering grade polypropylene / Nylon mix
Oxygen Permeability: 0 (Negligible)
O Ring: Balanced Twin Shore Viton & Silicon Mix

Maximum Operating Pressure: 10bar (150psi)
Maximum Op. Temperature: (Greater than or Equal to) 130°C

Connector Clips, Brackets & Fixtures
Punch pressed 306 Stainless Steel

Mounting Brackets (LT, TS & OG)
High Temperature Resistant Graphite Nylon

Covers & Corners
Ultra-stable temperature resistant ABS & UPVC
Foil Finish (where applied) Renolit MBAS 0.15mm


TherMiser control systems are designed to provide precise remote control of ThermaSkirt heating system, to closely maintain the desired room temperature and timings, providing a completely discreet heating system. Low surface temperature control for additional safety, or wireless multi-room zone control for ease of installation are also available.

Manual TRV
  • Simple comfort control TRV
  • ‘On-board’ design for instant operation
  • Colour coordinated knob & facia plate
  • Integrated lock shield valve for local isolation
  • Direct connection to standard 15mm pipes
  • Variety of covers to suit all installations
TherMiser single Room & Low Surface Temperature Control System
  • Electronic Touch Screen with 7 day/ 4 period programming
  • Room & ThermaSkirt Surface temperature control for LST applications such as hospitals, care homes and schools
  • Standard 35mm Switch back box mounting
  • 230v AC control
  • Eliminates TRV control knob on skirting
Wireless 2 Room / Control System
  • Wireless Touch Screen with 7 day/4period programming
  • 2 Zone wireless receiver can control 2 separate zones/room
  • Eliminates TRV control knob on skirting
  • Control valve secreted in cupboard or floor/wall/ceiling void
  • Rechargeable battery (Touch Screen)
  • 230v Hard wire supply to TM RC1 and onto TM RCV control valve
Wireless Multi Room Manifold Control System
  • Wireless room control for up to 8 Zones/areas
  • Direct connection from Control unit to Manifold actuators – no intermediate control unit required
  • Rechargeable, portable touch screen thermostats
  • Programmable for time & temperature
  • Complete range of manifolds from 2 – 8 ways

Yes - and it couldn’t be simpler!

Download our free ThermaSkirt® Designer Software and follow the simple steps to install it on your system. After the installation is finished, launch the design software to create your own ThermaSkirt® heating system - in minutes! It will even work out your heat loss calculation, heat output, temperature drop & flow resistance!

ThermaSkirt® can be supplied in pre-cut ready-to-install room kits, complete with a numbered room plan. Your installer can follow the step-by-step instructions supplied.

Alternatively, you can buy full 2M, 3M and 6M lengths and cut on site. Ask about our on-site training day.

Full set of instructions are available and can be downloaded from the Technical Information section of our website.

Have a question or need a custom quote?

Let us help you improve the aesthetics, space and energy performance of your home by fitting "ThermaSkirt – The Worlds Smartest Heating System"

Contact us now


  
    
  
  
  

 


Company

Showroom:
DiscreteHeat Company Limited
1 Victoria Works Industrial Estate
Coal Pit Lane, Atherton
Manchester, M46 0FY

01942 88 00 60
01942 66 51 04
info@discreteheat.co.uk

VAT# 884427392
Company Reg# 5594330