How is ThermaSkirt Installed?

Installation in a nutshell:

  • Remove existing skirting boards (if fitted)
  • Cut ThermaSkirt panels to length and deburr the tubes with tool provided
  • Fit adjustable mounting brackets to the walls at 600~1000mm spacing
  • Insert the appropriate push fit connectors for the joint required
  • Snap fit the ThermaSkirt panels onto the brackets and push fit together
  • Complete the installation by clipping on the covers to hide the joints


ThermaSkirt is installed like a replacement skirting board, all around the room. ThermaSkirt panels are cut to length in accordance with the fitting instructions, ensuring enough space is left for the various joints and connectors and a small amount of expansion. Available in lengths of up to 6m, meaning most walls can be done in a single section.

Unique push-fit oval connectors simply slide into the deburred pipes and are retained by a stainless push fit clip – no soldering, drilling or sealant is required during installation. Special brackets secure the panels to the wall, and then purpose made covers hide all the joints. It’s quick, simple and above all, does not cause major disturbance to existing floors or finishes. Very often, the existing radiator pipes can be re-used when fitting.

ThermaSkirt doesn't need specially prepared screeded surfaces and can even be fitted on timber constructed floors. Plus - ALL the heat from the ThermaSkirt goes straight into the room and not into the subfloor, speeding up response times.

ThermaSkirt is a competent DIY fit, but we also have a network of registered installers who can provide a complete heating system solution, as well as fitting ThermaSkirt.

DiscreteHeat can also offer an Installation Training day. For a nominal fee, we can train your preferred plumber (or joiner!) to install ThermaSkirt to a professional standard, at your location; often enabling the installation to be completed quicker, thus reducing the overall cost.



Interested in getting ThermaSkirt in your home? Contact us now


Simply piece it together - No specialist tools required

Thermaskirt can be installed with conventional boilers and renewables such as heat pumps and solar thermal


Installers

Find your nearest distributor / installer


Interested in becoming a registered ThermaSkirt installer?
Click here to apply (additional supporting data about yourself may be required).

Company

Showroom:
DiscreteHeat Company Limited
1 Victoria Works Industrial Estate
Coal Pit Lane, Atherton
Manchester, M46 0FY

01942 88 00 60
01942 66 51 04
info@discreteheat.co.uk

VAT# 884427392
Company Reg# 5594330